ADTRAN TSU 120e Editing the Temp Map, Explanation, Applying the Temp Map, Reviewing Maps

Chapter 8. Telnet/Terminal Menus

Editing the Temp Map

To edit the Temp Map, follow these steps.

Step	Action
1	To make additional changes to the Temp Map, use Selection
	7 to enter the Temp Map edit mode.
	Explanation:
	Upon entering this mode, the cursor location moves to DS0
	number one in the DS0 field of the Temp Map. The cursor
	may be moved from one DS0 to another using the Arrow
	Keys until it is located at the DS0 number whose assigned
	port needs to be changed.
2	Press the Enter Key to move the cursor to the Port field
3	Use the Arrow Keys to scroll through the possible port
	selections.
4	Press the Esc Key to restore the previous port assignment
	and return to the DS0 field.
5	Press the Enter Key to save the current selected port and
	return to the DS0 field.
	Explanation:
	Once the cursor is again located in the Temp Map DS0 field,
	pressing the Esc Key a second time, causes the cursor to
	return to Selection 1 below the Temp Map display.

Applying the Temp Map

Once the Temp map reflects the desired configuration, use Selections 8 or 9 to apply this configuration to Map A or B, respectively.

Reviewing Maps

Selections 4 through 6 give a summary of the number of ports assigned to Map A, Map B, and the Temp Map, respectively.

8-4 TSU 120 User Manual 61202129L1-1