ADTRAN TSU 120e user manual Connector type Part number, Table C-4. V.35 Pinout Nx56/64 DTE

Appendix C. Network Pinouts

Nx56/64 DTE (V.35)

See Table C-4for the V.35 pinout Nx56/64 DTE pinout.

Connections

The DTE interface pinout is as follows:

	Connector type			V.35
	Part number			AMP# 92-4883-3-x
	Table C-4. V.35 Pinout - Nx56/64 DTE
Pin		Name		Description
A		101	Protective ground (PG)
B		102	Signal ground (SG)
C		105	Request to send (RTS) from DTE
D		106	Clear to send (CTS) to DTE
E		107	Data set ready (DSR) to DTE
F		109	Received line signal detector (DCD) to DTE
L, J		—	Local Loopback (LL)*
N, BB		—	Remote loopback (RL)*
R		104	Received data (RD-A) to DTE
T		104	Received data (RD-B) to DTE
V		115	RX clock (RC-A) to DTE
X		115	RX clock (RC-B) to DTE
P		103	Transmitted data (TD-A) from DTE
S		103	Transmitted data (TD-B) from DTE
Y		114	TX clock (TC-A)
AA		114	TX clock (TC-B)
U		113	External TX clock (ETC-A) from DTE
W		113	External TX clock (ETC-B) from DTE
NN, K		—	Test mode (TM) to DTE

*(ignored by TSU 120)

C-4 TSU 120 User Manual 61202129L1-1