Set Chain Port Input, Chain-In PC | ADTRAN TSU 120e instruction

Chapter 2. Installation

Set Chain Port Input

The TSU 120 can be configured from the chain port input when T-WATCH Pro, SNMP, or the terminal interface are being used. In this case, the chain port baud rate must also be selected.

Chain-In (PC)

The unit can be controlled from an external PC connected directly or via modem to the chain-in port. When using chain- in, the selection of the chain-in port baud rate from 9600 (fac- tory default), 1200, 2400, 19200, or 38400 must be made using the UNIT CONFIGURATION MENU. See Unit Menu on page 5-12for details.

Unless locked out externally, the front panel can also control the unit.

Chain-in/Chain Out

TSU 120 units and other TSUs can be linked together to form a chain. Figure 2-4provides an example of a chain-in arrange- ment with a PC or a modem. The first TSU 120 in the chain receives controlling input from the PC or modem.

PC or Modem

Chain Chain

Input Out

TSU 120

Chain Chain

In Out

TSU 120/

TSU 100/TSU

Chain Chain

In Out

TSU 120/

TSU 100/TSU

Figure 2-4. Example of Chain-in

Subsequent TSUs in the chain are in a position to intake infor- mation from another TSU. This in-taking of information from another TSU in the chain is identified as chain-in. The baud rate for the chained units must match that of the first unit.

Unless locked out externally, the front panel can also control the unit.

2-8

TSU 120 User Manual

61202129L1-1

Image 36

ADTRAN TSU 120e user manual Set Chain Port Input, Chain-In PC, Chain-in/Chain Out

Contents

TSU 120 & 120e Part Number 1202129L1 1202129L2 Trademarks Adtran Web Site Product Matrix Faxback Document Line Y2K Project LineMail Page REN/SOC FIC Usoc Page Canadian Emissions Requirements Canadian Equipment Limitations Affidavit Requirements for Connection To Digital Services Page Page Important Safety Instructions Warranty and Customer Service Xiv Table of Contents Chapter Operation Chapter Status Menu Chapter Configuration Menu Chapter Utility Menu Chapter Test Menu Chapter Telnet/Terminal Menus Index Index-1 Table of Contents List of Figures List of Figures List of Tables List of Tables Introduction TSU 120 Overview Standard Features in the TSU TSU Option Modules OCU DPDSU DP BR1TE TSU 120 Configuration Applications Option Module ArchitectureRouter, PBX, Video Conferencing Applications UNPACK, INSPECT, Power UP Receipt InspectionAdtran Shipments Include Customer Provides Power Connection Grounding Instructions Installation Identification of Rear Panel Layout TSU 120e Rear Panel TSU 120 Interfaces Network Test InterfaceNx56/64 Serial Interface TSU 120e only DSX-1 PBX Interface DSX-1 Test InterfaceChain Port Input Chain Port Output Power Up Testing Self-TestInitialization Set User Passcode Set Chain Port Input Chain-In PCChain-in/Chain Out Power-Up Procedure Installation Front Panel Front Panel Descriptions Name LED Descriptions CSU Status Button. See Operation Keys on TSU 120 Front Panel Layout DSU/DSX Status Module Status Operation Keys General Menu Operation Select and Activate a Menu Item Step Action Set the Data Field Display Only Data Fields Data Port Identification Exit Any Menu Field Operation Or Display Config Configuration Front Panel Menu StructureStatus Util Utilities Alternate Methods of Control Watch Pro Adtran PC ProgramWatch Pro/LAN Connection Watch Pro/EIA-232 Connection Snmp Terminal Mode Telnet Status Menu Network Performance Reports NI Perf Rpts Network Interface Performance Report Network Interface Errors NI Errors Active Alarms View History Port Status Nx56/64 Menu Items DTE Data/Clock DTE StatusPort Rate DBU Data/CNTRL TSU 120e only DSX-1 Menu Items DSX-1 Errors DBU Contrl TSU 120e onlyDBU Status TSU 120e only YES/NO indication of active DBU status Clear Port Alarm Clear Port Alm Remote PortEnet Status TSU 120e only Status Menu Configuration Menu Complete Configuration Menu Network NI Network NI Menu ItemsMenu Item Description SET LBO InbandLpbck BIT TSU 120 Clock Sources Network Timed Network Timed Clock Source Base DSX-1 Timing DSX-1 Timed Clock Source DTE Timing DTE Timed Clock Source Internal Timing Internal Clock Source Secondary Timing Normal CSU Timing Normal CSU Unit Menu Default IP AddressSubnet Mask Map Exchange Map Xchng Map In Use ABOFF Auto DS0 Map a and DS0 Map B Copy a B TempCreate Temp Review MAP AB Review Temp Edit TempApply Temp AB DSO Map Example Create Temp Selection Screen Port Configuration Port Config Nx56/64 Port Configuration Port Config Menu ItemsNx56/64 Menu Items Description DS0 Rate Data CTSDCD DSR Inband Mode Normal Mode of OperationTX CLK Source DBU Configuration Menu Items TSU 120e only Backup ModeBackup on Backup Delay Restore Delay Retry DelayBackup Testing Enable HR Disable HRDSX-1 Port Configuration Port Config Menu Items Yellow Alarm Signaling Line Length FTIN-BAND Loopback Utility Menu Complete Utility Menu Tree Factory Restore Fact Restore Time/DateSet Passcode If you want to Do this Unit ID Change/Set a PasscodePasscode Automatic Time-out No Passcode Desired CMD Mode Software Revision Software RevPort Utility Option Ports Enet Address TSU 120e only Utility Menu Test Menu Complete Test Menu Tree Network Tests Loopback TestsNetwork Interface Loopbacks Line Loopback Network Loopback Tests Activates the line loopback Test Patterns All Zeros All OnesQrss Pattern Terminates pattern generation Example Run Self-test Port Tests Port Test Menu Items for 0.1 Nx56/64 Loop is deactivated Cancel Tests DBU Loopback TSU 120e onlyDBU Test TSU 120e only DBU TST Result TSU 120e only Main Menu Telnet/Terminal Main Menu Status, Config, Util, and Test Menu Options DS0 Maps Configuration Menu Map Configuration Initializing the Temp MapIf you want to Use these selections Editing the Temp Map ExplanationApplying the Temp Map Reviewing Maps Remote Menu Access Management ConfigurationUnit Access Table Unit Access Table Add New Unit Default Unit Passcode Modify UnitDelete Unit Snmp Read Community Snmp Trap Community Host 1 Trap IP AddressHost 2 Trap IP Address Host 3 Trap IP Address Telnet/Terminal Timeout Telnet/Terminal PasswordSystem Location Auth. Fail Traps Sent Flash Download Quit Session About Snmp Basic ComponentsNetwork Manager Agent Commands MessagesGetRequest GetNextRequest TSU 120 Snmp Access Trap Snmp Trap Configuration Snmp MIB Browser Configuration Table A-1. How to Configure Network Manager MIB Snmp MIB Files Supported by the TSU Standard MIBs Adtran Enterprise-specific MIBsAdtran Product MIB ADTRAN.MIB Ftp.adtran.com Appendix B Understanding TR-08 Table B-1. Alarm Conditions FelpOOF TR-08 DS0 Conversion Table Table B-2.TR-08 DS0 Conversion TableDS0 TR-08 Channel Number Port Appendix B. Understanding TR-08 Wiring Network PinoutsConnections Table C-1. Network Pinouts Control In/Chain Table C-2. Control In/Chain in Pinout Chain Out Table C-3. Chain Out Pinout Connector type Part number Nx56/64 DTETable C-4. V.35 Pinout Nx56/64 DTE Connector type RJ-48C Table C-5. Pinout Connectors for Modular Jack InterfaceBase DSX-1 PBX Connector type Usoc 10BaseT TSU 120e onlyTable C-6 BaseT Ethernet TSU 120e only Pin Name to NIC Alarm Messages Network Interface NINx56/64 Interface Status Messages Following messages indicate the status of the Nx56/64 card Appendix D. System Messages Electrical Specifications T1/FT1 InterfaceCompatibility Nx56/64 V.35 Interface CTS, DCD, DSRDSX-1 Interface Chassis Specifications Management InterfacesChain In/Out Ports Option Slot Interface Environmental Specifications Input PowerFuse Operating Temperature Max Power Index Numerics GetNextRequest Snmp A-5 Index-4 61202129L1-1 Index-5 Index-6 61202129L1-1 Presales Inquiries and Applications Support Post-Sale SupportRepair and Return