Restore Delay, Retry Delay, NUM Retries, Backup | ADTRAN TSU 120

Chapter 5. Configuration Menu

Menu Items	Description

RESTORE DELAY	Selects the time that elapses between the network
	going out of alarm or data and the backup call
	being taken down. If NEVER is selected, the user
	must deactivate the backup mode.
	Choices: 1 sec, 3 sec, 10 sec, 30 sec, 1 min, 5 min,
	10 min, never

RETRY DELAY	Selects the time between redialing the external
	DCE after failed dial attempts.
	Choices: 10 sec, 30 sec, 1 min, 5 min, 10 min

NUM RETRIES	Selects the number of times the DBU will attempt
	to redial if unable to connect.
	Choices: None, unlimited, 3 times, 10 times.

BACKUP	Selects the options for the automatic ISDN verifica-
TESTING	tion feature of the Nx/DBU. Verification of the
	backup circuit does not disrupt data on the T1.
	BACKUP TEST:
	Selects the frequency of automatic backup circuit
	verification by the DBU.
	Choices: Manual, Hourly, Daily, Weekly
	TEST HOUR:
	Selects the hour of the day the Backup test will
	occur.
	Choices: 0-23
	TEST DAY:
	If Weekly Backup test is selected, selects which day
	to perform the test.
	Choices: Monday - Sunday

WKEND	If no backup is desired from midnight Friday to
LOCKOUT	midnight Sunday, set this selection to ON; other-
	wise set to OFF.
	Choices: On, Off

5-22

TSU 120 User Manual

61202129L1-1

Image 80

ADTRAN TSU 120e user manual Restore Delay, Retry Delay, NUM Retries, Backup, Testing, Wkend, Lockout

Contents

TSU 120 & 120e Part Number 1202129L1 1202129L2 Trademarks Mail Adtran Web Site Product Matrix Faxback Document LineY2K Project Line Page REN/SOC FIC Usoc Page Canadian Emissions Requirements Canadian Equipment Limitations Affidavit Requirements for Connection To Digital Services Page Page Important Safety Instructions Warranty and Customer Service Xiv Table of Contents Chapter Operation Chapter Status Menu Chapter Configuration Menu Chapter Utility Menu Chapter Test Menu Chapter Telnet/Terminal Menus Index Index-1 Table of Contents List of Figures List of Figures List of Tables List of Tables Introduction TSU 120 Overview Standard Features in the TSU TSU Option Modules OCU DPDSU DP BR1TE Router, PBX, Video Conferencing Applications TSU 120 Configuration ApplicationsOption Module Architecture UNPACK, INSPECT, Power UP Receipt InspectionAdtran Shipments Include Customer Provides Power Connection Grounding Instructions Installation Identification of Rear Panel Layout TSU 120e Rear Panel Nx56/64 Serial Interface TSU 120e only TSU 120 InterfacesNetwork Test Interface DSX-1 PBX Interface DSX-1 Test InterfaceChain Port Input Chain Port Output Power Up Testing Self-TestInitialization Set User Passcode Chain-in/Chain Out Set Chain Port InputChain-In PC Power-Up Procedure Installation Front Panel Front Panel Descriptions Name LED Descriptions CSU Status Button. See Operation Keys on TSU 120 Front Panel Layout DSU/DSX Status Module Status Operation Keys General Menu Operation Select and Activate a Menu Item Step Action Set the Data Field Display Only Data Fields Data Port Identification Exit Any Menu Field Operation Or Display Config Configuration Front Panel Menu StructureStatus Util Utilities Watch Pro/LAN Connection Alternate Methods of ControlWatch Pro Adtran PC Program Watch Pro/EIA-232 Connection Snmp Terminal Mode Telnet Status Menu Network Performance Reports NI Perf Rpts Network Interface Performance Report Network Interface Errors NI Errors Active Alarms View History Port Status Nx56/64 Menu Items DTE Data/Clock DTE StatusPort Rate DBU Data/CNTRL TSU 120e only DSX-1 Menu Items DSX-1 Errors DBU Contrl TSU 120e onlyDBU Status TSU 120e only YES/NO indication of active DBU status Enet Status TSU 120e only Clear Port Alarm Clear Port AlmRemote Port Status Menu Configuration Menu Complete Configuration Menu Menu Item Description Network NINetwork NI Menu Items SET LBO InbandLpbck BIT TSU 120 Clock Sources Network Timed Network Timed Clock Source Base DSX-1 Timing DSX-1 Timed Clock Source DTE Timing DTE Timed Clock Source Internal Timing Internal Clock Source Secondary Timing Normal CSU Timing Normal CSU Unit Menu Default IP AddressSubnet Mask Map Exchange Map Xchng Map In Use ABOFF Auto DS0 Map a and DS0 Map B Copy a B TempCreate Temp Review MAP AB Review Temp Edit TempApply Temp AB DSO Map Example Create Temp Selection Screen Port Configuration Port Config Nx56/64 Port Configuration Port Config Menu ItemsNx56/64 Menu Items Description DS0 Rate Data CTSDCD DSR TX CLK Source Inband ModeNormal Mode of Operation DBU Configuration Menu Items TSU 120e only Backup ModeBackup on Backup Delay Restore Delay Retry DelayBackup Testing Enable HR Disable HRDSX-1 Port Configuration Port Config Menu Items Yellow Alarm Signaling Line Length FTIN-BAND Loopback Utility Menu Complete Utility Menu Tree Factory Restore Fact Restore Time/DateSet Passcode If you want to Do this Unit ID Change/Set a PasscodePasscode Automatic Time-out No Passcode Desired CMD Mode Software Revision Software RevPort Utility Option Ports Enet Address TSU 120e only Utility Menu Test Menu Complete Test Menu Tree Network Tests Loopback TestsNetwork Interface Loopbacks Line Loopback Network Loopback Tests Activates the line loopback Qrss Pattern Test Patterns All ZerosAll Ones Terminates pattern generation Example Run Self-test Port Tests Port Test Menu Items for 0.1 Nx56/64 Loop is deactivated Cancel Tests DBU Loopback TSU 120e onlyDBU Test TSU 120e only DBU TST Result TSU 120e only Main Menu Telnet/Terminal Main Menu Status, Config, Util, and Test Menu Options DS0 Maps Configuration Menu If you want to Use these selections Map ConfigurationInitializing the Temp Map Editing the Temp Map ExplanationApplying the Temp Map Reviewing Maps Unit Access Table Remote Menu AccessManagement Configuration Unit Access Table Add New Unit Default Unit Passcode Modify UnitDelete Unit Snmp Read Community Snmp Trap Community Host 1 Trap IP AddressHost 2 Trap IP Address Host 3 Trap IP Address Telnet/Terminal Timeout Telnet/Terminal PasswordSystem Location Auth. Fail Traps Sent Flash Download Quit Session About Snmp Basic ComponentsNetwork Manager Agent Commands MessagesGetRequest GetNextRequest TSU 120 Snmp Access Trap Snmp Trap Configuration Snmp MIB Browser Configuration Table A-1. How to Configure Network Manager MIB Snmp MIB Files Supported by the TSU Standard MIBs Adtran Enterprise-specific MIBsAdtran Product MIB ADTRAN.MIB Ftp.adtran.com Appendix B Understanding TR-08 OOF Table B-1. Alarm ConditionsFelp TR-08 DS0 Conversion Table Table B-2.TR-08 DS0 Conversion TableDS0 TR-08 Channel Number Port Appendix B. Understanding TR-08 Wiring Network PinoutsConnections Table C-1. Network Pinouts Control In/Chain Table C-2. Control In/Chain in Pinout Chain Out Table C-3. Chain Out Pinout Table C-4. V.35 Pinout Nx56/64 DTE Connector type Part numberNx56/64 DTE Base DSX-1 PBX Connector type RJ-48CTable C-5. Pinout Connectors for Modular Jack Interface Connector type Usoc 10BaseT TSU 120e onlyTable C-6 BaseT Ethernet TSU 120e only Pin Name to NIC Nx56/64 Interface Alarm MessagesNetwork Interface NI Status Messages Following messages indicate the status of the Nx56/64 card Appendix D. System Messages Compatibility Electrical SpecificationsT1/FT1 Interface DSX-1 Interface Nx56/64 V.35 InterfaceCTS, DCD, DSR Chassis Specifications Management InterfacesChain In/Out Ports Option Slot Interface Environmental Specifications Input PowerFuse Operating Temperature Max Power Index Numerics GetNextRequest Snmp A-5 Index-4 61202129L1-1 Index-5 Index-6 61202129L1-1 Repair and Return Presales Inquiries and Applications SupportPost-Sale Support