Contents
xli
Cisco IE 2000 Switch Software Configuration Guide
OL-25866-01
Configuring the Policed-DSCP Map 38-48
Configuring the DSCP-to-CoS Map 38-48
Configuring the DSCP-to-DSCP-Mutation Map 38-49
Configuring Ingress Queue Characteristics 38-49
Mapping DSCP or CoS Values to an Ingress Queue and Setting WTD Thresholds 38-49
Allocating Buffer Space Between the Ingress Queues 38-50
Allocating Bandwidth Between the Ingress Queues 38-51
Configuring the Ingress Priority Queue 38-51
Configuring Egress Queue Characteristics 38-52
Allocating Buffer Space to and Setting WTD Thresholds for an Egress Queue-Set 38-52
Mapping DSCP or CoS Values to an Egress Queue and to a Threshold ID 38-53
Configuring SRR Shaped Weights on Egress Queues 38-54
Configuring SRR Shared Weights on Egress Queues 38-55
Configuring the Egress Expedite Queue 38-56
Limiting the Bandwidth on an Egress Interface 38-56
Monitoring and Maintaining Standard QoS 38-56
Configuration Examples for Standard QoS 38-57
Configuring the SRR Scheduler: Example 38-57
Configuring DSCP-Trusted State on a Port: Example 38-58
Allowing ACL Permission for IP Traffic: Examples 38-58
Configuring a Class Map: Examples 38-58
Creating a Policy Map: Example 38-59
Creating a Layer 2 MAC ACL: Example 38-59
Creating an Aggregate Policer: Example 38-60
Configuring COS-to-DSCP Map: Example 38-60
Configuring DSCP Maps: Examples 38-61
Configuring an Ingress Queue: Example 38-62
Configuring the Egress Queue: Examples 38-63
Creating a Layer 2 MAC ACL: Example 38-63
Additional References 38-64
Related Documents 38-64
Standards 38-64
MIBs 38-64
RFCs 38-64
Technical Assistance 38-65
CHAPTER
39 Configuring Auto-QoS 39-1
Finding Feature Information 39-1
Prerequisites for Auto-QoS 39-1