Cisco Systems IE 2000 CLI Error Messages

2-5
Cisco IE 2000 Switch Software Configuration Guide
OL-25866-01
Chapter 2 Using the Command-Line Interface
CLI Error Messages
CLI Error Messages
Table 2-3 lists some error messages that you might encounter while usi ng the CLI to configure your
switch.
Configuration Logging
You can log and view changes to the switch configuration. You can use the Configuration Change
Logging and Notification feature to track changes on a per-session and per-user basis. The logger tra cks
each configuration command that is applied, the user who entered the command, the time that the
command was entered, and the parser return code for the command. This feature includes a mechanism
for asynchronous notification to registered applications whenever the configurat ion changes. You can
choose to have the notifications sent to the syslog.
Note Only CLI or HTTP changes are logged.
Tab l e 2-3 Common CLI Error Messages
Error Message Meaning How to Get Help
% Ambiguous command:
"show con"
You did not enter enough characters
for your switch to recognize the
command.
Reenter the command followed by a question mark (?)
with a space between the command and the question
mark.
The possible keywords that you can enter with the
command appear.
% Incomplete command. You did not enter all the keywords or
values required by this command.
Reenter the command followed by a question mark (?)
with a space between the command and the question
mark.
The possible keywords that you can enter with the
command appear.
% Invalid input detected
at ‘^’ marker.
You entered the command
incorrectly. The caret (^) marks the
point of the error.
Enter a question mark (?) to display all the commands
that are available in this command mode.
The possible keywords that you can enter with the
command appear.