39-6
Cisco IE 2000 Switch Software Configuration Guide
OL-25866-01
Chapter 39 Configuring Auto-QoS
Information About Auto-QoS
The switch automatically sets up the ingress queues, with
queue 2 as the priority queue and queue 1 in shared mod e. The
switch also configures the bandwidth and buffer size for the
ingress queues.
Switch(config)# no mls qos srr-queue input
priority-queue 1
Switch(config)# no mls qos srr-queue input
priority-queue 2
Switch(config)# mls qos srr-queue input bandwidth 90
10
Switch(config)# mls qos srr-queue input threshold 1
8 16
Switch(config)# mls qos srr-queue input threshold 2
34 66
Switch(config)# mls qos srr-queue input buffers 67
33
The switch automatically configures the egress queue buffer
sizes. It configures the bandwidth and the SRR mode (shaped
or shared) on the egress queues mapped to the port.
Switch(config)# mls qos queue-set output 1 threshold
1 138 138 92 138
Switch(config)# mls qos queue-set output 1 threshold
2 138 138 92 400
Switch(config)# mls qos queue-set output 1 threshold
3 36 77 100 318
Switch(config)# mls qos queue-set output 1 threshold
4 20 50 67 400
Switch(config)# mls qos queue-set output 2 threshold
1 149 149 100 149
Switch(config)# mls qos queue-set output 2 threshold
2 118 118 100 235
Switch(config)# mls qos queue-set output 2 threshold
3 41 68 100 272
Switch(config)# mls qos queue-set output 2 threshold
4 42 72 100 242
Switch(config)# mls qos queue-set output 1 buffers
10 10 26 54
Switch(config)# mls qos queue-set output 2 buffers
16 6 17 61
Switch(config-if)# priority-que out
Switch(config-if)# srr-queue bandwidth share 10 10
60 20
If you entered the auto qos voip trust command, the switch
automatically sets the ingress classification to trust the CoS
value received in the packet on a nonrouted port by using the
mls qos trust cos command or to trust the DSCP value
received in the packet on a routed port by using the mls qos
trust dscp command.
Switch(config-if)# mls qos trust cos
Switch(config-if)# mls qos trust dscp
If you entered the auto qos voip cisco-phone command, the
switch automatically enables the trusted boundary feature,
which uses the CDP to detect the presence or absence of a
Cisco IP phone.
Switch(config-if)# mls qos trust device cisco-phone
Table 39-4 Generated Auto-QoS Configuration (continued)
Description Automatically Generated Command