Cisco Systems OL-11291-01 manual On your device run the command, Expected output on your device is

Appendix C SA Agent Feature Mapping

Verify Your SA Agent Version

On your device run the command:

show rtr application

The expected output on your device is:

Version: 2.2.0 Round		Trip Time	MIB
Max Packet Data Size		(ARR and	Data): 16384
Time of Last Change in Whole RTR: *17:23:28.000 UTC Sun Mar 21 1993
System Max Number	of	Entries:	500
Number of Entries	configured:		12
Number of active Entries: 12
Number of pending	Entries: 0
Number of inactive Entries: 0
Supported Operation Types
Type of Operation	to	Perform:	echo
Type of Operation	to	Perform:	pathEcho
Type of Operation	to	Perform:	udpEcho
Type of Operation	to	Perform:	tcpConnect
Type of Operation	to	Perform:	http
Type of Operation	to	Perform:	dns
Type of Operation	to	Perform:	jitter
Type of Operation	to	Perform:	dlsw
Type of Operation	to	Perform:	dhcp
Type of Operation	to	Perform:	ftp

Supported Protocols

Protocol Type: ipIcmpEcho

Protocol Type: ipUdpEchoAppl

Protocol Type: snaRUEcho

Protocol Type: snaLU0EchoAppl

Protocol Type: snaLU2EchoAppl

Protocol Type: ipTcpConn

Protocol Type: httpAppl

Protocol Type: dnsAppl

Protocol Type: jitterAppl

Protocol Type: dlsw

Protocol Type: dhcp

Protocol Type: ftpAppl

Number of configurable probe is 483

RTR low memory water mark: 3531486

From the output, Version refers to the SAA version that is running on your device. In addition to this, you get information about:

•IPM operations that are supported

•Protocols that are supported

•Number of collectors that are configured

•Number of collectors that can be configured

User Guide for Internetwork Performance Monitor

C-2 OL-11291-01