Cisco Systems OL-11291-01 manual Options, RtcollName srcName, SrcName, StopcollName srcName

Appendix B IPM Command Reference

Table B-1	IPM Commands (continued)
Command		Description
ipm browserpath		(Solaris only) Sets a user-defined IPM Web browser path, and verifies that the browser
		specified by the user exists.
		(Windows only) Resets the IPM Web browser path to the Internet Explorer path. If Internet
		Explorer is not found, resets to the Netscape Navigator path. If neither is found, clears the IPM
		Web browser path.
		You can use this command only if you have administrative privileges.
ipm clientaddr		If the workstation on which an IPM client is running has multiple IP addresses, forces the IPM
		client to bind to a specific IP address.
		You can use this command if you are a member of the casusers group.
ipm cleanreport		Cleans reports older than n days, where n stands for number of days.
		You can use this command if you are a member of the casusers group.
ipm console		Displays the contents of the ipmConsoleLog.log file.
		You can use this command if you are a member of the casusers group.
ipm control servername		Starts and stops a collector, where servername is the name of the IPM server. The command
options		server name is optional. If server name is not specified, the local server is used as the IPM
		server.
		The options include the following:
		•	–rtcollName srcName
			Starts a real time chart for the collector named collName on the source router named
			srcName.
			If you Telnet into a remote workstation and you do not set the DISPLAY variable to local
			display, you cannot use this command. See Setting the DISPLAY Variable in Solaris for
			details.
		• –startcollName srcName duration (hrs)
			Starts the collector named collName on the source router named srcName, for a number of
			hours specified by duration. A ‘0’ duration specifies a ‘forever’ collection.
		• –startcollName srcName duration -rt
			Starts the collector named collName on the source router named srcName, for a number of
			hours specified by duration, and starts a real time chart for the collector. A ‘0’ duration
			specifies a ‘forever’ collection.
		•	–stopcollName srcName
			Cancels the running collector named collName on the source router named srcName.
		You can use this command only if you have administrative privileges.
ipm cw2ksetup		Checks to see which files are installed, and installs additional files as necessary. Use this
		command to integrate IPM and CiscoWorks in the following instances:
		• You installed CiscoWorks after you installed IPM.
		• IPM and CiscoWorks are no longer integrated for some reason.
		You can use this command only if you have administrative privileges.

User Guide for Internetwork Performance Monitor

B-2 OL-11291-01