Cisco Systems OL-11291-01 manual Operation Description

Chapter 2 Getting Started With IPM

Configuring the IPM Components

Table 2-1	Predefined Operations (continued)
Operation		Description
DefaultSMTP		Measures the time to perform a TCP connect operation directed at the
		selected target on the standard Simple Mail Transfer Protocol (SMTP)
		port 25. Packet Priority is set to 0 (no priority) and Target Port is set to
		25.
DefaultSnaLu0Echo		Measures end-to-end latency in an SNA network using LU0. Protocol
		is set to SNA LU0, Mode Name is set to INTERACT, and Response
		Payload is set to 64 bytes.
DefaultSnaLu2Echo		Measures end-to-end latency in an SNA network using LU2. Protocol
		is set to SNA LU2, Mode Name is set to D4A32782, and Response
		Payload is set to 64 bytes.
DefaultSnaSSCPEcho		Measures end-to-end latency in an SNA network using SSCP protocol.
		Protocol is set to SNA SSCP.
DefaultTelnet		Measures the time to perform a TCP connect operation directed at the
		selected target on the standard Telnet port 23. Packet Priority is set to
		0 (no priority) and Target Port is set to 23.
DefaultUDPEcho		Measures end-to-end latency for a UDP datagram. Packet Priority is
		set to 0 (no priority), Request Payload is set to 64 bytes, and Target
		Port is set to 7.
DefaultVideo		Measures latency and jitter for Video traffic. Packet Priority is set to
		0 (no priority), Request Payload is set to 1024 bytes, Packet Interval is
		set to 20 milliseconds, Number of Packets is set to 20, and Target Port
		is set to 50505.
DefaultVPN		Measures latency and jitter for VPN traffic. Packet Priority is set to
		0 (no priority), Request Payload is set to 1024 bytes, Packet Interval is
		set to 20 milliseconds, Number of Packets is set to 20, and Target Port
		is set to 2000.
Default160ByteVoice		Measures latency and jitter for Voice over IP traffic. Packet Priority is
		set to 5, Request Payload is set to 160 bytes, Packet Interval is set to
		20 milliseconds, Number of Packets is set to 10, and Target Port is set
		to 16400.
Default60ByteVoice		Measures latency and jitter for Voice over IP traffic. Packet Priority is
		set to 5, Request Payload is set to 60 bytes, Packet Interval is set to
		20 milliseconds, Number of Packets is set to 10, and Target Port is set
		to 16400.

Note that you can define one or more new operations to fit your needs. For information about defining, modifying, or deleting operations, see Working With Operations.

Note Although you cannot modify the default operations, you can use them as templates for creating your own operations.

IPM does not provide a predefined HTTP or FTP operation. Therefore, before you create an HTTP collector or a FTP collector, you must first create the respective HTTP or FTP operation.

	User Guide for Internetwork Performance Monitor
2-16	OL-11291-01