Cisco Systems OL-5378-01 manual 45-18

Chapter 45 Cisco IP Phone Configuration

Configuring Cisco IP Phones

Table 45-1 Phone Configuration Settings (continued)

		Field		Description
		Network Locale		From the drop-down list box, choose the locale that is
				associated with the phone. The network locale contains a
				definition of the tones and cadences that the phone in a
				specific geographic area uses.
				Cisco CallManager makes this field available only for
				Cisco IP Phone 7940, 7960, and 7905 models, and
				Cisco VGCPhones (phones that use the Cisco VG248
				Gateway).
				Note If no network locale is specified,
				Cisco CallManager uses the network locale
				associated with the device pool.
				Note If the users require information to be displayed
				(on the phone) in any language other than
				English, verify that the locale installer is
				installed before configuring network locale.
				Refer to the Cisco IP Telephony Locale Installer
				documentation.
		Phone Button and Expansion Module Template Information
		Phone Button		Choose the appropriate phone button template. The
		Template		phone button template determines the configuration of
				buttons on a phone and identifies which feature (line,
				speed dial, and so on) is used for each button.
				The value that you enter overrides the default value for
				this type of device. See the “Device Defaults
				Configuration” section on page 6-1.
				Cisco CallManager does not make this field available for
				H.323 clients or CTI ports.
		Expansion Module 1	If your phone is connected to a Cisco IP Phone 7914
				Expansion Module, choose the appropriate template.
		Expansion Module 2	If your phone is connected to a second
				Cisco IP Phone 7914 Expansion Module, choose the
				appropriate template.
	Cisco CallManager Administration Guide
45-18				OL-5378-01