Cisco Systems OL-5378-01 manual Defaults Configuration section on, 45-19

Chapter 45 Cisco IP Phone Configuration

Configuring Cisco IP Phones

Table 45-1 Phone Configuration Settings (continued)

Field

Description

Softkey Template Information

Softkey Template

Choose the appropriate softkey template. The softkey template determines the configuration of the softkeys on the Cisco IP Phones 7960, 7940, and 7905.

Firmware Load Information (Leave blank to use default.)

Phone Load Name	Enter the custom software for the Cisco IP Phone.
	The value that you enter overrides the default value for
	the current model. For more information, see the “Device
	Defaults Configuration” section on page 6-1.
	Cisco CallManager does not make this field available for
	H.323 clients or CTI ports.
	For more information about Cisco IP Phone software and
	configuration, refer to the Cisco IP Phone
	Administration Guide for Cisco CallManager.
Module 1 Load	Enter the custom software for the Cisco IP Phone 7914
Name	Expansion Module, if applicable.
	The value that you enter overrides the default value for
	the current model.
Module 2 Load	Enter the custom software for the second
Name	Cisco IP Phone 7914 Expansion Module, if applicable.
	The value that you enter overrides the default value for
	the current model.

Cisco IP Phone—External Data Locations (Leave blank to use default.)

Information

Enter the location (URL) of the help text for the information (i) button. Leave this field blank to accept the default setting.

Cisco CallManager displays this field only for Cisco IP Phone 7960 and 7940 models.

	Cisco CallManager Administration Guide
OL-5378-01		45-19