Cisco Systems OL-6426-02 manual 13-14

Chapter 13 Configuring Dial Backup and Remote Management

Configuring Dial Backup and Remote Management Through a V.92 Modem

	Command	Purpose
Step 4
	dialer in-band	Specifies support for dial-on-demand routing
		(DDR) and chat scripts on this asynchronous
	Example:	interface.
	Router(config-if)# dialer in-band
	Router(config-if)#
Step 5
	dialer string dial-string	Specifies the telephone number to be dialed.
	Example:
	Router(config-if)# dialer string
	T14085551234
	Router(config-if)#
Step 6
	dialer-group group-number	Assigns the dialer interface to a dialer group
		(1–10), controlling access. The number to which
	Example:	the dialer access group belongs is defined with the
	Router(config-if)# dialer group 1	dialer-list command.
	Router(config-if)#
Step 7
	async mode interactive	Returns a line that has been placed into dedicated
		asynchronous network mode to interactive mode,
	Example:	thereby enabling the Serial Line Internet Protocol
	Router(config-if)#async mode interactive	(SLIP) and PPP EXEC commands.
	Router(config-if)#
Step 8	peer default ip address {ip-addresspool	Assigns IP addresses to remote clients, using an
	[pool-name]}	address pool. To create an IP address pool, use the
		ip local pool global configuration command.
	Example:
	Router(config-if)#peer default ip address
	pool pool123
	Router(config-if)#
Step 9
	exit	Exits asynchronous interface configuration, and
		enters global configuration mode.
	Example:
	Router(config-if)# exit
	Router(config)#

	Cisco 1800 Series Integrated Services Routers (Fixed) Software Configuration Guide
13-14	OL-6426-02