Cisco Systems OL-6426-02 Specifies a list of networks on which Eigrp is to, Routerconfig# network

Chapter 1 Basic Router Configuration

Configuring Enhanced IGRP

	Command	Purpose
Step 2
	network ip-address	Specifies a list of networks on which EIGRP is to
		be applied, using the IP address of the network of
	Example:	directly connected networks.
	Router(config)# network 192.145.1.0
	Router(config)# network 10.10.12.115
	Router(config)#
Step 3
	end	Exits router configuration mode, and enters
		privileged EXEC mode.
	Example:
	Router(config-router)# end
	Router#

For complete information on the IP EIGRP commands, see the Cisco IOS Release 12.3 documentation set. For more general information on EIGRP concepts, see Appendix B, “Concepts.”

Configuration Example

The following configuration example shows the EIGRP routing protocol enabled in IP networks 192.145.1.0 and 10.10.12.115. The EIGRP autonomous system number is assigned as 109.

Execute the show running-configcommand from privileged EXEC mode to see this configuration.

!

router eigrp 109 network 192.145.1.0

network 10.10.12.115

!

Verifying Your Configuration

To verify that you have properly configured IP EIGRP, enter the show ip route command, and look for EIGRP routes indicated by “D.” You should see verification output similar to the following example.

Router# show ip route
Codes: C - connected,				S -	static, R		- RIP,		M - mobile, B - BGP
D - EIGRP, EX - EIGRP external,								O -	OSPF,	IA -	OSPF inter area
N1	-	OSPF	NSSA	external		type	1,	N2 -	OSPF	NSSA	external type 2
E1	-	OSPF	external		type	1, E2 -		OSPF	external type 2

i- IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2 ia - IS-IS inter area, * - candidate default, U - per-user static route o - ODR, P - periodic downloaded static route

Gateway of last resort is not set

10.0.0.0/24 is subnetted, 1 subnets

C10.108.1.0 is directly connected, Loopback0

D3.0.0.0/8 [90/409600] via 2.2.2.1, 00:00:02, Ethernet0/0

Cisco 1800 Series Integrated Services Routers (Fixed) Software Configuration Guide

1-16 OL-6426-02