Troubleshooting the Installation
The slot 0 and slot 1 LEDs indicate which PCMCIA (Flash memory) card slot is in use, and each LED blinks when the card is accessed by the system.
Note The RSP7000 is oriented horizontally in the Cisco 7010 router.
Caution The reset switch (see Figure 5) resets the RSP7000 and the entire system. To prevent system errors and problems, use it only at the direction of your service representative.
Figure 5 RSP7000 LEDs, Cisco 7000 Orientation Shown
NORMAL
| EJECT | ||
SLOTSLOT | 1 |
| |
0 |
|
| |
| CPU | HALT | |
|
|
| |
| RESET | ||
H5378
247000 Series Route Switch Processor (RSP7000) Installation and Configuration in the Cisco 7000 Series Routers
