Cisco Systems UCS C210 manual Attaching a Slide-Rail Assembly

Chapter

Figure 2-2 Attaching a Slide-Rail Assembly

1	2
	3
	4

5

6

195968

1	Front-left rack post	2	Rear-left rack post
3	Slide-rail assembly	4	Length-adjustment bracket
5	Locking clip (one on each end of assembly)	6	Mounting pegs (two on each end of assembly)

Note The mounting pegs that protrude through the rack-post holes are designed to fit round or square #12-24 holes, or #10-32 holes when the mounting peg is compressed (see Figure 2-3). If your rack has #10-32 rack-post holes, align the mounting pegs with the holes and then compress the spring-loaded pegs to expose the #10-32 inner peg.

Figure 2-3 Spring-Loaded Mounting Pegs

1

2

330245

1

Pegs in standard (uncompressed) position

2

Pegs compressed to expose 10-32 inner peg

c.Pull the inner slide rails on each assembly out toward the rack front until they hit the internal stops and lock in place.

Cisco UCS C210 Server Installation and Service Guide

2-6 OL-20887-02