Chapter
Rack Requirements
This section provides the requirements for the standard open racks, assuming an external ambient air temperature range of 32 to 95°F (0 to 35°C).
The rack must be of the following type:
•Standard
•The rack post holes can be square or round when you use the supplied slide rails.
•The minimum vertical rack space per server must be two rack units (RUs), equal to 3.50 inches (8.89 cm).
•The distance between the front and rear rack posts must be as follows to fit the Cisco slide rails:
–For the older rails
–For the new style rails
Tip The Cisco
Required Equipment
The slide rails supplied by Cisco Systems do not require any tools for installation, but you might want to use a tape measure and level to help level the slide rails during installation.
The slide rails include screws that you can optionally use to apply additional stability. These screws are not required.
Slide Rail Adjustment Range
The slide rails for this server have an adjustment range of 24 to 36 inches (610 to 914 mm).
Cisco UCS C210 Server Installation and Service Guide
|
| |
|
