Operation

Resetting Air Circuit

The air circuit must be reset before press can be used. Resetting is required if:

●Press has been shut down.

●Any safety bar or red emergency stop button has been activated.

●Gauge indicates 0 air pressure.

To reset air to press:

Move buck to dressing position by hand.

Turn red emergency stop button in direction of arrows until it pops up.

Press reset button. Air should reset and line pressure (approximately 65 psi [4.48 bar]) should register on gauge.

NOTE: If press does not reset, call a qualified service technician.
Pressing Short Sleeve Shirts

Sleeve extender arms are not used when a short sleeve shirt is dressed on the buck. The operator should turn the steam timer selector switch to the off position to stop live steam and sleeve blower air through sleeve armhole.

CAUTION

To avoid possible injury:•ALWAYS turn STEAM Timer Selector switch OFF when pressing short sleeve shirts.•ALWAYS stand clear of live steam when sending buck into pressing cabinet.

W441

10

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

AJ0975