Operation
Post-Operating Services
Perform the following services after the final operation of the day or anytime press will be idle for an extended period of time:
1.Turn off steam to buck sleeve openings by pressing the steam Timer Selector switch to the off position.
2.Mist air bags with water and send unloaded buck into pressing cabinet (this will prolong the life of the air bag and eliminate formation of wrinkles in air bags). Repeat 4 times.
3.Press one safety bar to relieve air pressure and stop blower.
4.Open
5.Close steam
6.Close
7.Clean buck padding with a damp cloth. Check condition of buck padding and air bags. Replace padding if:
●Cover is scorched or torn.
●Bags have holes.
●Flannel is hard or brittle (not springy).
8.Clean press heads if required.
Cleaning Press Heads
Press heads require cleaning if:
●Discoloration transfers from head to shirts.
●Shirts stick to heads as the heads open.
Once precautions listed in these WARNINGS have been met, follow directions provided with surface cleaner to clean press heads.
WARNING
To avoid possible serious injury, heads should be cleaned ONLY by properly trained personnel.
W376
WARNING
To avoid possible serious injury, ALWAYS shut off services to press BEFORE removing guards and covers to clean press heads.
•Shut off AND lock out ALL electrical power to press.
•Shut off AND lock out ALL air pressure to press using the relieving
•Reduce steam pressure to 0 AND lock out steam supply to press.
•Let heated surfaces cool.
W377
WARNING
If using a surface cleaner which requires heat to the press, use an industry approved heat protective mitt or other heat protective device as press heads are cooling down.
W378
12 | © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT | AJ0975 |