Maintenance

Periodic Inspections

Timer Intervals

Operation or Inspection

Corrective Action

 

 

 

Daily or as required

Visually inspect the air intake filters.

Replace when dirty. They are

 

 

throwaway-type filters but can be

 

 

cleaned once before discarding.

 

 

 

 

Visually inspect intake air screen.

Remove lint from screen.

 

 

 

 

NOTE: Do not operate blowers unless air filters are installed.

 

 

 

 

Visually inspect the sight glass in the air

If moisture and oil are collecting in the

 

line filter at the inlet.

bowl, the auto-drain is not working.

 

 

Clean, repair or replace air filter.

 

 

 

 

Visually check the discharge tube gasket.

Replace worn or missing gasket.

 

 

 

 

NOTE: DO NOT operate press if

discharge tube gasket is missing.

 

 

 

Weekly

Inspect air line filter for sediment.

Clean as necessary.

 

 

 

 

Inspect all safety labels. See Parts

Replace labels which are damaged,

 

Manual for location and description of

missing or unreadable.

 

labels.

 

 

 

 

 

Inspect buck stop adjustments. Shock

Adjust shock or bumper as required.

 

absorber should not bottom out.

 

 

 

 

Every 2 weeks

Inspect steam strainers in steam inlet and

Clean strainers and traps.

 

outlet lines and in traps.

 

 

 

 

 

Inspect each blower motor intake for lint

Remove lint from motor.

 

build-up.

 

 

 

 

 

Inspect customer-furnished steam traps

Clean as necessary.

 

per instructions provided with traps.

 

 

 

 

Monthly

Check all steam and air connections for

Tighten any loose connections. Replace

 

visual signs of leakage.

lines where necessary.

 

 

 

 

Check condition of the flexible steam

Steam hoses with broken braids must be

 

hoses.

replaced.

 

 

 

 

Attempt to rock buck at operator station

If buck carriage rollers are loose against

 

back and forth; check rollers against

rails, tighten as required. Rollers should

 

rails.

be snug, but not too tight.

 

 

 

Every 6 months

Remove all covers and check cap

Tighten as required.

 

screws, fittings and cylinders for security

 

 

of attachments.

 

 

 

 

 

Table 3

 

24

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

AJ0975