Cissell CAB438C Filling Air Line Lubricator

Filling Air Line Lubricator

IMPORTANT: To avoid o-ring leaks at the top of the bowl, do not remove bowl. Fill through the oil fill hole. Refer to item 2, Figure 23.

When oil level falls below 1/4 full, refill the bowl to 3/4 full (oil level approximately 1/2 inch [12.7 mm] from top) with SAE 10 weight non detergent oil (refer to ).

Maintenance

WARNING

To avoid possible serious injury, ALWAYS close air supply line shut-off valve AND lock out air service BEFORE filling oil bowl.

W383

IMPORTANT: Do not overfill bowl. Damage to filter, regulator, valves and cylinders will result and void warranty.

TOP VIEW

1631605B

SIDE VIEW

SCR103N

Oil Flow Rate Adjusting Screw

Air Line Lubricator

2Oil Fill Hole

Figure 23

AJ0975

Contents

Keep These Instructions for Future Reference Page Table of Contents Notes Safety Information Page Operation Operation Rear View of CSBBYMV Operating Controls and Indicators Operating Controls and Indicators Page Resetting Air Circuit NOTE: If press does not reset, call a qualified service technician Pressing Short Sleeve Shirts To avoid possible injury: •ALWAYS turn STEAM Timer Selector switch OFF when pressing short sleeve shirts Pre-OperatingServices Post-OperatingServices Cleaning Press Heads CSBBYMV Operation Sequence Buck Dressing Instructions Figure NOTE: The front and back of shirt should now be straight NOTE: Only excessive wrinkles must be removed by operator NOTE: Stay clear as buck enters cabinet Shirt Quality Padding Quality Troubleshooting Trouble Probable Cause Solution Buck Page Page Maintenance Periodic Inspections Cleaning Air Filter Cleaning Steam Strainer Cleaning Customer-FurnishedSteam Traps Lubrication Monthly Lubrication Page Adjusting Air Line Lubricator Flow Rate Filling Air Line Lubricator