Cissell CAB438C NOTE: The front and back of shirt should now be straight

Operation

8.Press the left foot pedal to extend the sleeves and turn the buck vacuum on.

9.Notice a natural “A” at shirt’s placket. The gap at the bottom is related to shirt size. The larger shirts will have a smaller gap. Refer to Figure 13.

CORRECT

WRONG

CAB254N

Figure 13

10.Using the thumb and first finger of both hands, grasp bottom of placket and side seam on right side of shirt. Gently pull downward. Pull placket downward in the direction of the “A.” Refer to Figure 13.

CAB423N

Figure 14

11.With thumb and first finger of both hands, grasp the bottom of the placket and side seam at the left side of the shirt. Gently pull downward. Pull the placket downward in the direction of the natural “A.” This action has straightened the front and back of the shirt.

IMPORTANT: Do NOT attempt to fit the shirt to the buck or placket bowing will occur. The side seams of the shirt should roll toward back of buck. Remember, dress the shirt LOOSELY. The air bags will expand to fit the shirt.

12.Look in mirror to check shirt back for horizontal or angled wrinkles from the middle of yoke outward toward the sides. If necessary, gently pull shirt downward in center to remove these wrinkles. Air bags will remove vertical wrinkles when forming shirt.

NOTE: The front and back of shirt should now be straight.

AJ0975