Cissell CAB438C Maintenance, General, •filling oil bowl, Periodic Inspections, •removing filter bowl, Let heated surfaces cool, •Let heated surfaces cool

Maintenance

General

This section contains information and instructions required to perform periodic inspections and lubricate the press.

Shutdowns due to unscheduled maintenance can be avoided or minimized by:

●performing periodic inspections as described and

●performing lubrication services at the time intervals specified in these instructions.

The following are recommended precautions that service personnel must understand and apply when performing general periodic maintenance tasks.

WARNING

To avoid possible serious injury:

•ALWAYS shut off services to press BEFORE removing guards and covers to do ANY maintenance, service, set-up, adjustments or repair tasks.

•Shut off AND lock out ALL electric power to press.•Shut off AND lock out ALL air service to press.•Shut off AND lock out ALL steam service to press.

•Let heated surfaces cool.

•Be sure moving parts are at a standstill.•ALWAYS be careful to AVOID spring loaded components when working inside press.•NEVER adjust, clean or dress buck while indexing press.

•ALL maintenance, services, etc., MUST be performed ONLY by qualified service personnel.

W379

WARNING

To avoid possible serious injury ALWAYS close air supply line shut-off valve AND lock out air service BEFORE:

•opening filter drain cock•removing filter bowl•filling oil bowl

W380

Periodic Inspections

The frequency at which inspections should be performed, the inspection procedures to be followed, and the corrective actions to take are listed in Table 3. If complete details for the inspections and/or corrective actions are not listed in Table 3, refer to the referenced paragraphs for detailed instructions.

AJ0975