6.Grasp one sleeve with gusset facing you. Overlap gusset of cuff as if you are going to button cuff so that air does not escape gusset. The sleeve end is now closed (do not button). Refer to Figure 9.

Operation

NOTE: Dress sleeve into clamp at CUFF SEAM. Do NOT place cuff in clamp. Loading cuff into clamp will pinch or crease the cuff. A guide on each clamp will cause you to meet resistance if cuff is accidentally loaded. Refer to Figure 11.

CAB421N

Figure 9

7.Turn cuff so gusset is facing away from you. Slide closed sleeve upward in the sleeve extender just above cuff seam. Sleeve should not be twisted between shoulder and cuff. Pleat closest to gusset should ride top edge of sleeve. Repeat with other sleeve. Refer to NOTE:.

CAB422N

Figure 10

CAB478N

Figure 11

NOTE: Do NOT leave gap between cuff and clamp when loading sleeve. The area of the sleeve below clamp will NOT finish properly. Refer to Figure 12.

1

12

2

CAB479N

1Cuff

2Sleeve

Figure 12

NOTE: Do NOT clamp short sleeve shirts. Instead, turn STEAM Timer Selector switch to the OFF position when pressing short sleeve shirts. Return STEAM Timer Selector switch to the ON position for long sleeves.

AJ0975

© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT

15