Chapter2 Names and Functions of Parts
Operation Panel
5
1 2 3 4
1 POWER LED (Green)
It is lit when the power is supplied. When maintenance mode is set or there is an error indication, it is either lit or flashing.
2 PAPER OUT LED (Orange)
It is lit in paper out status. When maintenance mode is set or there is an error indication, it is either lit or flashing.
3 ERROR LED (Orange)
It is lit when the rear cover or front cover is open. When maintenance mode is set or there is an error indication, it is either lit or flashing.
4 FEED Switch
When this switch is pressed once, paper feeds (1 line). If it is held down, paper feeds continuously until it is released. And when there is a printer error, pressing this switch can cancel the error status.
5 LED NAME SHEET
This sheet is used reversed according to the printer installation method. See Vertical Installation and Wall Mounted Installation (page 23).
Display when installed horizontally
Display when installed vertically or wall mounted
18