Error Indicators
When this printer malfunctions or jams etc., the type of problem is indicated by a buzzer and by lit or flashing LED on the operating panel.
In error status, the error indication can be cancelled by pressing the FEED switch.
Error indicator tableType of Error | LED indicator | Operation and restoration method | |
|
|
|
|
Paper end | POWER | Lit | During printing, printing stops and the printer goes |
| PAPER OUT | Lit | offline. Replace the paper and close the cover to |
| ERROR | Off | return the printer online. |
|
|
|
|
Paper near end | POWER | Lit | In |
| PAPER OUT |
| Soft SW is set as enabled, PE, FAULT are output and |
| ERROR | Off | printing continues. When it is set as disabled, nothing |
|
|
| is output and printing continues. |
|
|
|
|
Rear/front cover | POWER | Lit | During printing, printing is immediately stopped and |
open | PAPER OUT | Depends on status | the printer goes offline. Close the cover to restore the |
| ERROR | Lit | printer to online status. |
|
|
|
|
Head hot | POWER | Lit | Cooling starts. After the temperature has fallen, it is |
| PAPER OUT | Depends on status | automatically restored and printing restarts. |
| ERROR |
| The buzzer continues to sound until the error is |
|
|
| cancelled by the FEED switch. |
|
|
|
|
HP abnormal | POWER |
| The printer goes offline. Remove the paper jam or |
| PAPER OUT |
| other problem and press the FEED switch to restore |
| ERROR |
| the printer to online status. |
|
|
| The buzzer continues to sound until the error is |
Black mark | POWER |
| |
| cancelled by the FEED switch. | ||
abnormal | PAPER OUT |
| |
|
| ||
| ERROR |
|
|
Cutter abnormal | POWER |
|
|
position detection | PAPER OUT |
|
|
| ERROR |
|
|
|
|
|
|
Hardware abnormal | POWER | Off | Turn off the power then turn it on again. If the error |
RAM | PAPER OUT |
| continues, notify the dealer where you purchased the |
| ERROR |
| printer or service personnel after turning off the power. |
|
|
|
|
Hardware abnormal | POWER | Off |
|
FROM | PAPER OUT |
|
|
| ERROR |
|
|
|
|
|
|
24V abnormal | POWER | Off |
|
| PAPER OUT | Off |
|
| ERROR |
|
|
|
|
|
|
•There are no RS232C communication error or front cover opened/closed detection indicators.
•If the buzzer setting is OFF in Soft SW Setting Mode, the buzzer does not sound.
: Lit, : Off
Mode Maintenance
41