Chapter3 Preparing the Printer

Installing roll paper

7. Being careful not to let the copy roll paper set on the rewinder shaft slacken, place the roll paper in the grooves on both sides.

Turn the flange on the rewinder shaft in the direction shown by the arrow and make sure that the copy roll paper rotates with the rewinder shaft.

Taking up slack while checking that the copy roll paper winds.

8. With the other side of the copy roll

Rear cover

 

paper (original side) pulled lightly

 

 

taut, close the rear cover firmly until

 

 

you hear a click.

 

 

Hold the center of the roll paper to pull

 

 

it as straight as possible so that one of

 

 

the sides of the paper does not slacken.

 

 

Paper feeds automatically and stops

 

 

at the print start position.

 

 

 

 

 

Caution

 

 

 

 

 

 

Be very careful not to let

 

the rear cover catch your

 

hands when closing the rear

 

cover.

 

Roll paper that is gently pulled taut.

9. Tear off surplus paper by holding one side of the end of the roll paper and pulling it towards you.

Caution

Do not insert any foreign objects such as a paper clip into the cutter unit.

32