Chapter3 Preparing the Printer
Connections
Connecting the Interface Cable
Turn off the power to the printer and insert the connectors being careful about their orientation.
Caution
Always hold the connector when pulling out a cable.
Install the interface cable so that it will not be caught on your shoes etc.
Connecting the serial (RS232C) interface cableMake sure that you insert it firmly and fix it in place by tightening the screw.
Serial (RS232C) interface cable
Connecting the parallel (IEEE1284) interface cableMake sure that you insert it firmly and fix it in place by turning the attachment screws in the direction shown by the arrow.
Parallel (IEEE1284) interface cable
20