Setting the Paper Width and Printing Line Column Number
The printing dot line columns are changed as follows by setting the “Paper Width” of the roll paper used, the “Number of col.” and the “Font Select” in Soft SW Setting Mode. For details about setting, see Soft SW Setting Mode (page 35).
When setting Paper Width of 76.2mm
Soft SW Setting Mode | Space between | Printing line | Full columns | ||
Number of col. | Font Select | characters | columns | ||
| |||||
40/33 | 9Ω9 dots | 3 dots | 33 columns | 400 dots | |
7Ω9 dots | 3 dots | 40 columns | |||
|
| ||||
42/35 | 9Ω9 dots | 2 dots | 35 columns | 386 dots | |
7Ω9 dots | 2 dots | 42 columns | |||
|
|
Paper width: 76.2mm
When Number of col. 40/33 are selected: 400 dots
Paper feed
direction
When Number of col. 42/35 are selected: 386 dots
erPrint the gPreparin
25