Citizen Systems iDP3240 user manual 1DH56Hm

GS	V	m ......... (1)
GS	V	m n ..... (2)

[Function]	Cutting the paper
[Code]	(1)	<1D>H<56>H<m>
	(2)	<1D>H<56>H<m><n>
[Range]	(1)	m = 1, m = 49
	(2)	m = 66
		0 n	255
[Outline]	Performs the specified paper cutting.
		m	Function
	1,49		Partial cut (Leaving a bridge area uncut)
	66		Paper feed by “cut position + {n × basic calculation
			pitch}” and partial cut (Leaving a bridge area uncut)
[Caution]	• In STANDARD MODE, this command only works when it is
	entered at the beginning of a line.

For (1):

• A partial cut (Leaving a bridge area uncut) is executed. For (2):

• If n = 0, the paper is fed to the cut position, and then cut. If n ≠ 0, the paper is fed by “n × basic calculation pitch” past the cut position, and then cut.

• The basic calculation pitch is set by GS P.

The paper feed amount is calculated with the vertical basic calculation pitch (y).

A fraction resulting from the calculation is corrected with the minimum pitch of the mechanism, and the remainder is omitted.

— 109 —