Citizen Systems iDP3240 user manual DLE DC4 n m t, Details

DLE DC4 n m t

[Function]	Outputting specified pulse in real-time.
[Code]	<10>H<14>H<n><m><t>
[Range]	n=1, m=0,1
	1 t 8
[Outline]	A signal specified with “t” is output to the connector pin
	specified with “m”.

m

0

1

Connector pin

Pin No. 2 of drawer Kick-Out Connector

Pin No. 5 of drawer Kick-Out Connector

[Details]	• On-time and off-time are set at t × 100 msec, respectively.
	• In case an error occurred during the processing of this
	command, the command is ignored.
	• In case (ESC p or DLE DC4 under execution), during the
	processing of this command the command is ignored.
	• This command will be processed as it is received.
	• In specification of serial interface, the command is executed
	even in offline, reception buffer full and error conditions.
	• In specification of parallel interface, this command cannot be
	executed while the printer is BUSY.
	• This command will be valid, even if specifying the printer is
	invalid due to the selection of peripheral units (ESC =).
[Caution]	• If the same data string as this command is present in the
	received data, the printer operates the same way as with this
	command. The user should, therefore, be careful.
	• The command cannot be inserted in another string of
	commands which consist of codes of 2 bytes or more.
[Reference]	ESC p

— 55 —