Citizen Systems iDP3240 user manual GS I n

GS I n

[Function]	Sending the printer ID
[Code]	<1D>H<49>H<n>
[Range]	1	n	3
	49	n	51

[Outline]	Sends the specified printer ID.
	n	Type of printer ID	Specification	Value (Hex.)
	1,49	Model ID	iDP3240	40
	2,50	Type ID	Refer to table “Type ID” below
	3,51	ROM version ID	As per ROM version

Type ID

Bit	Meaning	Hex.	Decimal
0	Equipped for 2 byte code support	01	1
1	Equipped with autocutter	02	2
2	Undefined	—	—
3	Undefined	—	—
4	Unused (Fixed at 0)	00	0
5	Undefined	—	—
6	Undefined	—	—
7	Unused (Fixed at 0)	00	0

[Caution]	• Under DTR/DSR control, the printer sends the printer ID after
	verifying that the host is ready to receive. If the host is not
	ready to receive, the printer waits for the host to become ready
	to receive.
	• Under XON/XOFF control, the printer sends the printer ID
	without checking whether the host is ready to receive or busy.
	• Because this command is executed when data is mapped in
	the receive buffer, there may be a delay between command
	receiving and printer ID sending depending on the condition
	of the receive buffer.
	• If ASB (Automatic Status Back) is enabled by GS a, the host
	must discriminate between the printer ID due to this command
	and the status due to ASB.

— 106 —