Citizen Systems iDP3240 user manual Table for Setting DIP Switches, Print density DIP switch

5.2 Table for Setting DIP Switches

DIP switch 1

No.	Function	ON	OFF	Factory setting
1	Auto cutter	Available	Not available	ON
2	Cover open	Invalid	Valid	OFF
3	Easy Loading	Invalid	Valid	OFF
4	Print columns	60 columns	69 columns	OFF
5	CR mode	LF Operation	Ignored	OFF
6	Input buffer	4K bytes	64K bytes	OFF
7	Print density	See the table below		ON
8				OFF

Print density (DIP switch 1)

Print density	Level 1	Level 2	Level 3	Level 4
No.	(Light)	(Standard)	(Slightly dark)	(Dark)
7	OFF	ON	OFF	ON
8	OFF	OFF	ON	ON

Note: If print density is set to level 2 or over, print speed may decrease.

— 26 —