Citizen Systems iDP3240 user manual Print Control Functions, Command List, Function Mode Code

10.PRINT CONTROL FUNCTIONS

10.1Command List

No.	Command	Function	Mode	Code	Page
1	HT	Horizontal tab	S.P.	<09>H	46
2	LF	Printing and paper feed	S.P.	<0A>H	47
3	CR	Back to printing	S.P.	<0D>H	48
4	FF	Printing in PAGE MODE and returning to	P	<0C>H	49
		STANDARD MODE
5	CAN	Canceling print data in PAGE MODE	P	<18>H	50
6	DLE EOT	Sending status in real-time	S.P.	<10>H<04>H<n>	51
7	DLE ENQ	Real-time request to printer	S.P.	<10>H<05>H<n>	54
8	DLE DC4	Outputting specified pulse in real-time	S.P.	<10>H<14>H<n>	55
				<m><t>
9	ESC FF	Printing data in PAGE MODE	P	<1B>H<0C>H	56
10	ESC SP	Setting the right spacing of the character	S.P.*	<1B>H<20>H<n>	57
11	ESC !	Collectively specifying the printing mode	S.P.	<1B>H<21>H<n>	59
12	ESC $	Specifying the absolute positions	S.P.*	<1B>H<24>H<n1>	61
				<n2>
13	ESC %	Specifying/Canceling download character set	S.P.	<1B>H<25>H<n>	63
				<1B>H<26>H<s>H
14	ESC &	Defining the download characters	S.P.	<n><m>[<a><p1>	64
				<p2> ⋅ ⋅ <ps⋅a>]
				m-n+1
15	ESC *	Specifying the bit image mode	S.P.	<1B>H<2A>H<m>	66
				<n1><n2>[<d>]k
16	ESC -	Specifying/Canceling underline	S.P.	<1B>H<2D>H<n>	68
17	ESC 2	Specifying 1/6-inch line feed rate	S.P.	<1B>H<32>H	69
18	ESC 3	Setting line feed width	S.P.*	<1B>H<33>H<n>	70
19	ESC =	Data input control	S.P.	<1B>H<3D>H<n>	71
20	ESC ?	Deleting download characters	S.P.	<1B>H<3F>H<n>	72
21	ESC @	Initializing the printer	S.P.	<1B>H<40>H	73
22	ESC D	Setting horizontal tab position	S.P.	<1B>H<44>H [<n>]k<00>	74
23	ESC E	Specifying/Canceling Emphasis Printing	S.P.	<1B>H<45>H<n>	75
24	ESC G	Specifying/Canceling Double strike printing	S.P.	<1B>H<47>H<n>	76
25	ESC J	Printing and feeding paper	S.P.*	<1B>H<4A>H<n>	77
26	ESC L	Selecting PAGE MODE	S	<1B>H<4C>H	78
27	ESC M	Selection of character fonts	S.P.	<1B>H<4D>H<n>	79
28	ESC R	Selecting the international character set	S.P.	<1B>H<52>H<n>	80
29	ESC S	Selecting STANDARD MODE	P	<1B>H<53>H	81

In the Mode column: S = STANDARD MODE, P = PAGE MODE

*shows the command affected by GS P.

— 42 —