Citizen Systems iDP3240 user manual Operation, Connecting the AC Adapter and AC Power Cord

4.OPERATION

4.1Connecting the AC Adapter and AC Power Cord

1

2

3

Turn off the power of the printer.

With the flat side of the AC adapter’s cable connector facing upward, insert the cable connector into the power connector on the back side of the printer.

Connect the AC power cord to the AC adapter of the printer or the AC adapter, and insert the AC power- cord plug into a suitable wall outlet.

Cable connector

AC adapter

Flat side

Power connector

AC power cord

CAUTION:

•Do not use any AC adapter other than specified.

•When connecting or disconnecting the cable connector of the AC adapter, always pull on the connector, not on the cable.

•The AC power cord should be connected to a wall outlet separated from others used by other equipment which tend to emit noise.

•Avoid pulling on the AC adapter cord, or the cord may be damaged or broken, causing a fire, electric shock.

•When the thunder rumbles nearby, disconnect the AC adapter from the wall outlet to avoid using the printer; otherwise, a thunderbolt may cause a fire or electric shock.

•Avoid placing the AC adapter cord near a heating device; otherwise, the cover of the cord may melt, causing a fire or electric shock.

•When you are not going to use the printer for a long period of time, disconnect the AC adapter from the wall outlet for safety.

— 10 —