Citizen Systems iDP3240 user manual Releasing a Locked Cutter

4.7Releasing a Locked Cutter

1Remove any paper in the paper path following the procedure in “4.6

Removing Paper Jams”.

Turn on the power of printer. The
2 auto cutter initializes itself, returning
the cutter blade to the normal
position. The alarm condition is also
cleared.	Emergency knob

3 If Step 2 failed to return the cutter blade and clear the alarm, then turn the printer off and using a pair of tweezers or a screwdriver, rotate the emergency knob located in a hole at the bottom of the printer in the direction shown to return the cutter blade.

4 Use a pair of tweezers to remove any remaining paper around the cutter blade.

CAUTION:

•Do not attempt to do anything inside the printer immediately after printing because the head and motor are very hot.

•When removing remaining paper, do not touch the heated surface of the head with bare hand or with metal.

•By using the DIP switch, you can either engage or disengage the cutter. When using the printer with the cutter disengaged, make sure that the cutter blade has been completely returned. If it has not, follow the above procedure to return it.

— 19 —