Citizen Systems iDP3240 user manual Top cover

4.4.2Setting Paper Rolls when Easy Loading is Disabled (“5.2” DS1-3 ON)

1 Follow steps 1 to 4 in “4.4.1 Setting Paper Rolls”.

2 Insert the end of the paper roll straight between the platen roller and the head.

3 The paper is automatically pulled in by the platen roller and guided into the auto-cutter. (The end of the paper will slightly stick out of the paper output slot of the cutter.)

After closing the printer cover, the
4 paper will be fed for a few more	Top cover
lines and then automatically cut.
Now, the printer is ready for
printing. Remove the piece of paper
cut off.

CAUTION:

•Always use the specified types of paper roll.

•Use of other types of paper roll may not be able to guarantee the specified print quality or service life of the printer.

•If the paper is slack, roll back the paper slightly to remove the slack. If there is too much slack, the paper may be too far from the paper sensor, possibly causing items 3 and 4 in “4.4.2 Setting Paper Rolls when Easy Loading is Disabled” to occur.

•If the paper roll is inclined, pull the platen levers to adjust the position of the paper roll.

•During printing, do not open the printer cover.

— 16 —