Clarity D714 Using Your Phone, Temporary Tone Dialing, Answer a Call, End a Call, Chain dialing

USING YOUR PHONE

1. Pre-dialing

Enter the phone number first, then press <TALK ON/FLASH> or <SPEAKER> to dial out the number. Press <TALK OFF/CLEAR> or <MUTE/X> to clear the entry.

2. Direct Dialing

Press <TALK ON/FLASH> or <SPEAKER> to access dial tone, then enter the phone number.

3. Dial a speed dial number

In idle mode, press and hold a dial pad key (0 through 9) to display the desired speed dial entry.

The handset automatically dials out the displayed number. - OR -

Press <TALK OFF/CLEAR> to stop dialing the displayed number. Note: You need to set the speed dial number first. If the speed dial location you selected is empty, the screen shows the speed dial list instead.

4.Call from Directory

1.In idle mode, press <UP> to access the directory.Alternatively, press <MENU/SELECT> to access the directory from the main menu.

2.Press <UP> or <DOWN> to select the desired directory entry.

3.Press <TALK ON/FLASH> or <SPEAKER> to dial out to the selected entry.

5.Call from the Call Log

1.In idle mode, press <DOWN> to access the call log.Alternatively, press <MENU/SELECT> to access the call log from the main menu.

2.Press <UP/DOWN> to select the desired call log entry.

3.Press <TALK ON / FLASH> or <SPEAKER> to dial out to the selected entry.

USING YOUR PHONE

6.Call from the Redial List

1.In idle mode, press <RD/P> to access the redial list.

2.Press <UP> or <DOWN> to select the desired redial number.

3.Press <TALK ON/FLASH> or <SPEAKER> to dial out to the selected

number.

Note:

Your handset automatically times the duration of every call. The call timer will display a few seconds after the call has been made. It is shown in hours, minutes and seconds format.

Temporary Tone Dialing

If you have pulse (rotary) dialing service only, you can temporarily switch from pulse to touch-tone dialing during a call.

During a call, press <*>. Buttons pressed after this send touch-tone signals.The telephone automatically returns to pulse dialing mode after you end the call.

Answer a Call

When the phone rings, press <TALK ON / FLASH> to use the earpiece - OR -

Press <SPEAKER > to use the speakerphone.

End a Call

During a call connection on handset, press <TALK OFF/ CLEAR> to end the call.

- OR -

Put the handset on the base station to end the call.

.Chain dialing

This feature allows you to initiate a dialing sequence from numbers stored in

22 23