Remote Access Code

ANSWERING SYSTEM SETTINGS

Remote Access Code

To access your answering system remotely from any touch-tone telephone, you need to enter a two-digit number (00-99). Unless you change it, the remote access code is 19.

To change the remote access code:

1.In idle mode, press <MENU/SELECT>, then <UP/DOWN> to select Answering sys.

2.Press <MENU/SELECT>, then <UP/DOWN> to select Ans sys setup.

3.Press <MENU/SELECT>, then <UP/DOWN> to select Remote

Code.

4.Press <MENU/SELECT>, then use the keypad to enter a two-digit remote code.

5.Press <MENU/SELECT> to confirm.

Remote Access

You can access the answering system remotely by dialing your home telephone number from any touch-tone telephone.

To remotely access the answering system:

1.Dial your telephone number from any touch-tone telephone.

2.When the answering system answers, enter the two-digit remote access code (19, unless you have changed it; refer to Remote access code).The answering system automatically announces the number of messages (new or old) if there are any.

3.If there are new messages, the answering system automatically begins to play new messages only.

-OR-

If there are no new messages, the answering system automatically begins to play all old messages.

4.You can also enter the remote commands - see table.

5.Hang up to end the call and save all messages.

ANSWERING SYSTEM SETTINGS

 

Press to listen to all messages. If there are new messages,

Play all messages

the system plays back only the new messages (oldest first).

1

If there are no new messages, the system plays back all old

 

messages (oldest first).

 

 

Play new messages

Press to listen to new messages only.

2

 

Delete a message

Press during a message playback to delete the current

3

message.

 

 

Delete all old

 

messages

Press to delete all old messages.

33

 

 

 

 

To repeat the message currently playing, press 4 after

Replay current or

the answering system plays the day and time the current

previous

message was received.

message

To listen to the previous message, press 4 while the

4

answering system is playing the day and time the current

 

message was received.

 

 

Stop

Press to stop playback and recording.

5

 

 

 

Play help menu

Press to listen to a list of remote commands.

* 5

 

 

 

Skip to next

Press during playback to skip the current message and

message

advance to the next message.

6

 

 

 

Record an

Press to record a new announcement. Begin speaking after

announcement

the long beep.

* 7

 

 

 

Exit or hang up

Press to end remote access (the call is terminated).

8

 

 

 

Turn system on

 

or off

Press to turn the answering system on or off.

0

 

48

49

Page 26
Image 26
Clarity D712, D714 manual Answering System Settings, Remote Access Code, To remotely access the answering system