ClearSounds A300 manual Modify PIN Personal Identification Number

1.Press the Menu soft key to display the main menu list.

2.Press up or down to scroll to BS Settings and then press the Select soft key.

3.Press down to scroll to Flash Time and then press the Select soft key.

4.The display shows the current setting. Press up or down to select Flash-1or Flash-2and then press the Save soft key.

If you subscribe to Call Waiting service from your local phone provider, during a phone call you will hear a beep to indicate another call is waiting on the line.

1.To connect to the waiting call, press the Flash soft key, and your original call is put on hold and the display will show R.

2.To switch between the two calls, press the Flash soft key.

NOTE: If you subscribe to Call Waiting on Caller ID, you will receive Caller ID information (if available) on Call Waiting calls (see page 37).

█Modify PIN (Personal Identification Number)

Your phone is equipped with a PIN, which is used when re- setting the base or handset to factory default settings. The default PIN is 0000. We suggest that you do not change the PIN from 0000, but if you need to change the PIN:

1.Press the Menu soft key to display the main menu list.

2.Press up or down to scroll to BS Settings and then press the Select soft key.

3.Press up or down to scroll to Modify PIN and then press the Select soft key.

4.The display shows “PIN ?”. Enter the current PIN, then press the Next soft key. If the old PIN is validated, you will be prompted to enter a new PIN. If the old PIN is

24 – ENGLISH