ClearSounds A300 manual Remote Code & Remote Access

█Remote Code & Remote Access

Remote Code

To operate your answering machine remotely, you will need to enter the Remote code. For security reasons, you should change this code (the default one is 0000): For more details on how to use remote access, please refer to Remote Access listed below. To change your Remote code:

1.Press the TAM soft key to display the TAM main menu list.

2.Press down to scroll to TAM Setting and then press the Select soft key.

3.Press up or down to scroll to Remote Code and then press the Select soft key.

4.The LCD shows the current Remote code. Enter the new code you would like to set up and then press the OK soft key.

Remote Access

You can access many features of your answering machine remotely from any touch tone phone. A four-digit security Remote code is required to access the system and the factory default code is 0000. To enter remote access:

1.Dial your phone number from any touch tone phone.

2.When the Announce1/Announce2 message starts to play, you may enter the remote access mode by inputting the Remote code. If you enter the Remote code incorrectly, the machine will ask you to enter code again. You are given 2 more attempts to correctly enter the code before the line is disconnected.

3.After you enter the Remote code, the system will play the menu of commands. You can then follow the commands to operate.

47 – ENGLISH