ClearSounds A300 manual Torch, No dial tone

4.Press up or down to select On or Off and then press the Select soft key. If you select On, the display asks you to enter the time in HH:MM.

5.Use the keypad to enter the time (If your time is set to the 12 – Hour format, you will still need to enter the time in the 24 – Hour format. Press the Next soft key.

6.The display shows Snooze On/Off. Press up or down to select Snooze On or Snooze Off and then press the Save soft key.

7.When the alarm sounds, press any key to switch it off. If you have selected Snooze On, the alarm will ring every 11 minutes. To stop the snooze alarm, you must press to prevent the snooze function from continuing. This automatically switches the Snooze function to Snooze Off. You will need to re-select Snooze On if you want to turn that function back on for the next time the alarm is set to go off.

█Torch

If you turn this feature on, the visual phone ringer light will remain lit and can be used as a light. To turn this feature on/

off, in standby mode, press and hold until the light turns on/off.

TROUBLESHOOTING

No dial tone

1.Check that all phone cord connections and AC adapter are securely plugged into the phone, wall jack and electric outlet.

2.Check that the handset batteries are installed properly and are in full power (pages 13-14).

3.Check that the phone is in the correct dialing mode: tone or pulse (page 23).

4.Plug another phone into the wall jack to make sure your phone service is working.

56 – ENGLISH