ClearSounds A300 manual Phone Handset Settings, Handset Name

4.Enter the PIN (the default PIN is 0000) and then press the Reset soft key. If the PIN is validated, the base settings will be reset to the initial factory settings, otherwise the settings will remain.

5.After resetting, the handset will return to standby mode.

PHONE HANDSET SETTINGS

Reminder: Press the Back soft key from any menu to return to the previous screen. To return to the main screen,

press . Otherwise, after 40 seconds, the phone will automatically return to the main screen from any menu if no

key is pressed.

█Handset Name

This feature allows you to give each registered handset a name in order to easily recognize each handset if you have more than one registered to the base. To set the handset name:

1.Press the Menu soft key to display the main menu list.

2.Press up or down to scroll to HS Settings and then press the Select soft key.

3.Press up or down to scroll to HS Name and then press the Select soft key.

4.Enter the handset name (up to 12 characters) by using the keypad (see page 50 for the character map and instructions) and then press the Save soft key to confirm and exit. The handset name will be displayed above your handset number in standby mode.

NOTE: If you make a mistake while entering the name, use the Erase soft key to correct it. Each time you press this key, the last character is deleted.

26 – ENGLISH