ClearSounds A300 manual Delete/Terminate Handset, Base Reset

not validated, a warning beep will sound and you will be returned to the Modify PIN menu.

5.Enter the new PIN and then press the Next soft key. You will be asked to confirm the PIN. Enter the new PIN again and then press the Save soft key to confirm and exit.

█Delete/Terminate Handset

This function allows you to delete a handset that is registered to the base.

1.Press the Menu soft key to display the main menu list.

2.Press up or down to scroll to BS Settings and then press the Select soft key.

3.Press the Select soft key to select Terminate HS. You will be prompted to enter the PIN.

4.Enter the PIN (the default PIN is 0000) and then press the OK soft key. If the PIN is validated, you will see a list of registered handsets.

5.Press up or down to scroll to the desired handset that you would like to delete and press the Select soft key. The selected handset will no longer be registered to the base.

NOTE: If you selected the current handset or a non-registered handset, a warning tone will be heard.

█Base Reset

This function allows you to reset the base settings for Dial Mode and Flash Time to the initial factory settings. To reset the base:

1.Press the Menu soft key to display the main menu list.

2.Press up or down to scroll to BS Settings and then press the Select soft key.

3.Press up or down to scroll to BS Reset and then press the Select soft key. You will be prompted to enter the PIN.

25 – ENGLISH