ClearSounds A300 manual Announcement Settings, TAM Alert

1.Press the TAM soft key to display the TAM main menu list.

2.Press down to scroll to TAM Setting and then press the Select soft key.

3.Press up or down to scroll to ANNC Select and then press the Select soft key.

4.Press up or down to select Announce1 or Announce2 and then press the Select soft key.

NOTE: Announce2 will be played if your answering machine becomes full.

TAM Alert

A tone will sound every minute when there is a new message and the tone will sound until messages are reviewed. This tone will be heard when you are on a phone call for at least

60 seconds. To change this setting:

1.Press the TAM soft key to display the TAM main menu list.

2.Press down to scroll to TAM Setting and then press the Select soft key.

3.Press down to select TAM Alert and then press the Select soft key.

4.Press up or down to select Off or On and then press the Select soft key.

█Announcement Settings

Announce1 is a conventional outgoing message that allows the caller to leave a message. This is the “answer and record” message.

Announce2 is an outgoing message that does NOT allow a caller to leave a message. This is the “answer only” message.

Each Announcement message can be up to 3 minutes.

42 – ENGLISH