ClearSounds A300 Caller ID information does not show, No Caller ID information while on a call

3.Make sure programming is done in the correct dialing mode (touch-tone or pulse).

Caller ID information does not show

1.Make sure you are subscribed to Caller ID service through your local phone company.

2.Let the phone ring a couple of times as there may be a delay in receiving the Caller ID information.

No Caller ID information while on a call

1.Make sure you service provides Caller ID information while you are on a call. This is sometimes known as “Caller ID on Call Waiting” or “Type II Caller ID”.

2.The phone cannot display the information if another phone on the same line is in use.

Answering Machine Tips

1.If you can’t hear the messages adjust the volume (page 8,29).

2.If the system always plays Announce2, the message memory may be full. Erase some messages.

3.If the incoming messages are incomplete, the message memory is full. Erase some messages.

TECHNICAL SPECIFICATIONS

General Number:	A300
Amplification:	Up to 25 dB incoming

Power Requirements AC power Adapter:

Base Input: 7.5V, 300mA

Handset Input: Ni-MH 1.2V x 3, 800mAh

Charging Time: 15 hours

Weight (lb): Base: .32 Handset: .28

Dimensions (in.) Base: 5.1x3.9x2.7 Handset: 6.6x2.3x1.5

Jack: 2.5mm headset

Features and Specifications subject to change without notice.

58 – ENGLISH