ClearSounds A300 manual Turning the Handset Power On/Off Mode, Visual and Vibrating Ringer

NOTE: If you set the volume to “Off”, when a call comes in, only the New Call information appears on the LCD and the phone will not ring.

NOTE: You can also adjust the ringer volume while you are

receiving an incoming call. Press up or down to increase or decrease the volume while the phone is ringing.

Visual and Vibrating Ringer

You can activate the visual ringer and vibrating handset function. A bright LED light will flash and the handset will vibrate when the phone rings. To turn this feature on/off:

1.In standby mode, press and hold until the icon

appears to activate and press and hold again to deactivate.

█Turning the Handset “Power On/Off” Mode

The A300 handset can be turned to “Power Off” mode, which can be a convenient way to prevent the phone from ringing without having to change the ringer setting. When you turn the handset to “Power Off” mode, calls can’t be made or received until you turn the power back “On”.

In Standby Mode (not during a live call):

1.To turn the handset “Off”, simply press and hold until the display turns off.

2.To turn the handset “On”, you can either:

a.Place the handset back into the base and the handset will automatically power on.

b.Press and hold until the display turns on.

█Using your Phone with Hearing Aids and Cochlear

Implants

Your phone can be used with hearing aids and cochlear implants equipped with a telecoil (T-coil). Adjust your hearing aid “T- switch” to the “T” position. Make sure to hold the handset close to your T-coil.

20 – ENGLISH