a.Press HOLD.
b.Enter “*” or “#”.
i.* ... to turn Toll Restriction ON.
ii.# ... to turn Toll Restriction OFF
c.Enter the 4 digit toll restriction access code which was set at Station #01. If no code was set, the access code is the initial number set at the factory, which is “1234”.
Note: Turning Toll Restriction ON at a telephone will have no effect unless restrictions have been stored at that telephone.
5.15Timer
5.15.1 Elapsed Call Time
The display automatically shows the elapsed time during a call.
5.15.2 Timer Reset
Press the up arrow (^)button, which is found directly below the display.
5.15.3 Elapsed Call Time (Previous Calls)
While the phone is
5.16Headset
Your 2740 is
You can use your headset to make or answer an outside call, an intercom call or a page. Simply press HEADSET instead of lifting the handset. During a call, you may switch back and forth between handset, headset and/or speakerphone as much as you like.
If you wish to override automatic line selection, press the desired LINE button instead of pressing HEAD- SET, and you will be connected to that line on the speakerphone. Then press HEADSET to toggle to the headset.
Press HEADSET again to hang up.
5.17Directory Card
Remove the directory card and write down the names or telephone numbers associated with memory locations.
5.18Memory Dial
Press the memory button where the desired telephone number is stored. The speakerphone turns on automatically, and the number is dialed out. You may lift the handset or press HEADSET to switch to a handset or headset call at any time.
31