3.Rotate the handset hook into the wall mount position.
4.Plug the coiled cord into the handset, and then plug the other end of the cord into the base.
5.Place the handset on the base.
1.3.7Assign a Station Number
Refer to Section 2.1 for detailed instructions on assigning a station number.
1.3.8Install Batteries (Optional)
While it is not necessary for you to install batteries in your 2740 telephone for it to function normally, we do recommend that they be installed. The batteries are not needed to preserve your memory dial numbers, because all memory dial numbers are stored in static memory. The purpose of having batteries installed is so that the telephone itself can function for up to two hours in the event of a power failure. The telephone uses 3AAAsize batteries. We recommend using alkaline batteries.
1.Make sure the AC cord remains attached to the telephone and to an electrical outlet
2.Turn the telephone over.
3.Remove the desk stand if attached.
4.Remove the battery door by using the tip of a ball point pen, paper clip, or similar object to release the battery door tab.
5.Remove the old batteries.
6.Insert 3 pieces of new sizeAAA 1.5V alkaline batteries. Please note the “+” and
7.Close the battery cover.
Use caution when disposing of old batteries. Do not dispose of them in a fire. They may explode.
9
