HOW TO REMOVE
THE SNOW HOOD
To access the spark plug, the snow
hoodmust be removed as follows:
1. Remove the choke controlknob
(see Figure21).
2. Remove the safety key.
3. Remove the mounting screws
(see Figure22).
4. Slowlyremove the snow hood.
Make sure that the primer button
hose and the Ignition wire are not
disconnected.
5. The spark plug can now be ac-
cessed.
6. Toinstall the snowhood, first make
surethat the primer button hose
andthe ignitionwire are connected.
7. Mountthe snow hood to the engine
and securewith the mounting
screws(see Figure 22).
8. Connectthe choke control knob
with the choke shafton the carbure-
tor (see Figure 23 and Figure 24).
Make surethe choke control knob is
properly installed. Ifthe choke con-
trol knob is not installed correctJy,
the choke will not operate.
9. Install the safety key.
Snow Hood
Spark k

P_

Choke
Control Knob
MountingScrews
22
Choke ChokeShah F_ure 23
Cafouretor Figure24
Rgure21
F-0410111L 22